The Grazier Kit was put together specifically to accomplish the rotational strip-grazing system that the Grazier System was originally designed for.  The pasture shown below has no fencing of any kind other than the Grazier System.  We strip-graze our 47 acres of warm season grasses with the Grazier, but there is no limit to the acreage this system can control.  Because it is such a short grazing season on this grass, we do not want to inhibit our nice riding areas with permanent fencing, yet we do want to utilize the grass with controlled grazing.

In this picture the red arrows parallel the 300-foot side fences of the Extended Grazier Kit.  The yellow arrows point to the ends of the lead fence, which is moved forward each day until the strip is completed.  This strip is pulled out to the full 150-foot width allowed by the Standard Winch Corners, though it could have been limited to something shorter.  Using Oversized Winch Corners, this same strip could have been up to 300 feet wide.

See our "Strip Grazing" page for more detail on this grazing technique.

And while this kit meets the needs of that strip-grazing system, when your needs vary you can easily use it in many different ways.  For instance, on a given day that you need an emergency fence, you can easily borrow one of the lead/back fences for that fast fence need, while forming a large paddock with the other fences to maintain your grazing needs.  This is the magic of the amazingly versatile Grazier System!

The Grazier Kit is comprised of 4 Winch Corners, 3 Standard Corners, adequate Line Posts according to the length of the kit, 1 Pel 2 D-Cell charger, and 4 Jumper Wire connectors.

The three Standard Corners included in this kit meet the needs of the strip-grazing system, but they also can be "borrowed" from the system along with one of the Standard Winch Corners and a few line posts to create a travel paddock whenever you choose to go camping with your horse!

Recognize the Power!