Pull and Hook

PULL-&-HOOK^TM Simplicity

makes all Grazier kits go up FAST!

Annette is shown here installing the Part-A-Pasture^TMlead fence.

1. SET

Step in the Winch Corner. When making an enclosed pen, the other three corners would be stepped in at this time, also.

2. PULL

Just grab the handle and walk, and out rolls BOTH strands of rope fence at the same time!

3. HOOK

Hook onto an endpoint if making a straight fence, or, if making an enclosed pen, back onto Winch Corner itself, which will create the gate opening.

4. POSTS

Step in however many line posts you need, wherever you want them along your fence line.

5. HANG

The rope easily slips right into the adjustable-height hangers on each linepost and corner.

6. TIGHTEN

Back at the Winch corner, just pull the rope toward you, and it will tighten all the way around.

7. WRAP

Now make just three or four quick wraps of both the top and bottom ropes around one of the built-on clasps.

8. ELECTRIFY

And last, use a jumper wire to connect to a hot fence or to any electric charger, or Grazier's 2 D-cell charger.

FINISHED!

Enjoy the fastest and easiest effective fence you've ever put up in your life!